D-Link DCS-5020L

43D-Link DCS-5222L User Manual
Section 4 - Conguration
IP Filter
Access List
Filtering:
Filter Type:
IPv4 Filter List:
IPv6 Filter List:
Add New Filter:
Administrator
IP Address:
Check this box to enable the IP Filter function.
Select whether to set the lter to allow or to
deny connections.
The current list of IPv4 addresses that are be-
ing ltered. Select a line and the click the de-
lete button to remove that entry.
The current list of IPv6 addresses that are be-
ing ltered. Select a line and the click the de-
lete button to remove that entry.
From the drop down menu, select whether to
add a single IP, an entire subnet, or a range of
IP addresses.
Check this option and enter the correct IP ad-
dress to always allow it to be able to access
the device.
Click Save Settings to save your changes.
The IP Filter is a feature used to allow or deny certain IP addresses
when accessing the DCS-5222L.