48D-Link DCS-5222L User Manual
Section 4 - Conguration
Sound Detection
Check this box to enable the motion detection
feature of your camera.
Specifies the measurable level that would
indicate sound. Please enter a value between
50 and 90, the higher the number the more
sensitive the camera will be to sound.
Enabling Sound Detection will allow your camera to use the
built-in microphone to trigger events with audio. If this option
is selected, the trigger by option under SD recording, Video Clip,
or Snapshot should also be selected.
Enable Sound
Detection:
Detection Level:
After making any changes, click the Save Settings button to save
your changes, or click the Don’t Save Settings button to discard your
changes.
To Next Page
Loading...
