D-Link DCS-5020L - D-Link DCS-5222 L User Manual

31D-Link DCS-5222L User Manual
Section 4 - Conguration
Enable:
Only During:
SD Recording
Type:
Keep Free
Space:
Cyclic
Check this box to enable the SD Recording
function.
Check this box to setup a scheduled time-
frame when recording should take place. This
is useful if you do not want to be recorded
when it would otherwise be inconvenient,
such as during the night or on weekends.
The SD Recording Wizard uses Prole 2 by de-
fault. More information about video proles
can be found on page 38. You can set the le
type from the drop down menu. You can also
specify how many seconds before and after
the event should be recorded, as well as how
long the maximum duration of the video clip
should be in minutes.
Set the capacity of your local SD Card to pre-
vent the system from becoming unstable.
When this option is selected, it will cause
the oldest snapshot/video les to be deleted
when the system requires storage space for
new snapshot/video les.
Click Next to continue.
SD Recording Notications is a feature to record video to the SD
card when a trigger is activated. The SD card must be formatted
for use with the camera prior to running the wizard. This can be
done by using the format option found under SD Management.
For more details, please refer to page 50.