D-Link DCS-5020L

29D-Link DCS-5222L User Manual
Section 4 - Conguration
Enable:
Only During:
Snapshot Type:
Target:
Check this box to enable the Snapshot
function.
Check this box to setup a scheduled time-
frame when notications should be sent. This
is useful if you do not want to be notied
when it would otherwise be inconvenient,
such as during the night or on weekends.
Select whether to take a single snapshot or to
take 6 snapshots with a 1 second interval be-
tween them.
Select where you want the snapshot to be
sent. It may be uploaded to an FTP or E-mailed
to an e-mail address. You will need to have all
of the necessary information lled out in or-
der to use either of these features.
Click Next to continue.
Snapshot Notications is a feature to send image snapshots via
FTP or e-mail when a trigger is activated. This step will only set
up notications to be sent with still images that are captured. If
you would like to have notications with video please leave this
disabled and continue to the next step.