D-Link DCS-5020L - Page 32

28D-Link DCS-5222L User Manual
Section 4 - Conguration
Enabling the Video Motion option will allow your camera to use
the motion detection feature. You may draw a nite motion area
that will be used for monitoring in a selected area.
Enable Video
Motion:
Enable PIR:
Sensitivity:
Drawing Mode:
Clear:
Select this box to enable the motion detec-
tion feature of your camera.
When this option is selected, use PIR (passive
infrared) to detect motion.
Species the measurable dierence that
would indicate motion. Enter a value between
0 and 100.
Select Draw Motion Area to select the area of
the picture to monitor for movement to trig-
ger recording or a snapshot. Use your mouse
to click and drag on the area that you would
like to monitor for motion. Select Erase Mo-
tion Area to clear a selected region and stop
the camera from monitoring that area of the
picture.
Clears all motion detection areas from the
picture.
Click Next to continue.