D-Link DGS-1210-10 - Debug Info

5 Command Line Interface D-Link Web Smart Switch User Manual
102
DGS-1210-28>
debug info
Purpose
To display the ARP table and MAC FDB information of the
Switch.
Syntax
debug info
Description
The debut info command displays the ARP table and MAC FDB
of the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the ARP table and MAC FDB information of the Switch:
DGS-1210-28> debug info
% segmentation fault log file:
File doesn’t exist !!!
% ARP table :
Address Hardware Address Type Interface Mapping
------- ------ ----------- ---------------- ------ ------------- -------------
10.90.90.90 00:18:8b:bf:75:30 ARPA vlan1 Static
10.90.90.98 00:19:5b:14:3d:c4 ARPA vlan1 Dynamic
10.255.255.255 ff:ff:ff:ff:ff:ff ARPA vlan1 Static
% MAC table :
Vlan Mac Address Type Ports
------ -------------------- -------- -------
1 00:00:00:00:00:26 Learnt Gi0/7
Total Mac Addresses displayed: 1
DGS-1210-28>