4 Configuration D-Link Web Smart Switch User Manual
80
To add a new profile, click Add button. The updates to show the follows:
Figure 4.110 - ACL > ACL Access List – Add ACL Profile
Access-List: Specify the access list name for the ACL profile to be added.
Packet Type: Specify the packet type to be MAC, IPv4, IPv4 Exdended or IPv6 then click Apply button.
To modify an existing rule, please click on the Sequence No. hyperlink.
Figure 4.111 - ACL > ACL Access List – Update ACL Profile
ACL > ACL Access Group
The ACL Access Group page allows user to configure the ACL access group settings.
Figure 4.112 - ACL > ACL Access Group
Port: Specify the ports to be added in the access list group.
MAC Access-List: Add the specified ports in the MAC access list group.
To Next Page
Loading...
