Figure 27. Trap Setting
System Events: Monitoring the system’s trap.
Device Bootup: A trap when booting up the system.
Illegal Login: A trap when there is a wrong password login, and it will
record the IP from where the login attempt was made.
Password Setting
Password is the invaluable tool for the manager to secure the Web
Management Switch. You can use this function to change the password.
If you forget the password, press the “Reset” button in the rear panel of the
Switch. The current setting includes VLAN, Port Setting… etc. will be lost
and the Switch will be restored to the default setting.
Figure 28. Set Password
Backup Setting
The backup tools help you to backup the current setting of the Switch. Once
you need to backup the setting, press the “Backup” button to save the setting.
32
To Next Page
Loading...
