The Web Management Utility was divided into four parts, Discovery List,
Monitor List, Device Setting, and Toolbar function, for detailed instructions,
follow the section below.
Discovery List
This is the list where you can discover all the Web managed devices in
the entire network.
By pressing the “Discovery” button, you can list all the Web Managed
devices in the discovery list.
Double click or press the “Add to monitor list” button to select a device
from the Discovery List to the Monitor List.
System word definitions in the Discovery List:
MAC Address: Shows the device MAC Address.
IP Address: Shows the current IP address of the device.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the device product name.
System Name: Shows the appointed device system name.
Location: Shows where the device is located.
Trap IP: Shows the IP where the Trap is to be sent.
Subnet Mask: Shows the Subnet Mask set of the device.
Gateway: Shows the Gateway set of the device.
Monitor List
All the Web Smart Devices in the Monitor List can be monitored; you
can also receive traps and show the status of the device.
System word definitions in the Monitor List:
S: Shows the system symbol of the WebSmart device,
represents a device that is not alive.
IP Address: Shows the current IP address of the device.
MAC Address: Shows the device MAC Address.
14
To Next Page
Loading...
Need help?
General