To restore a current setting file to the device, you must specify the backup file
and press the “Restore” button to process the setting of the recorded file.
Figure 29. Backup Setting
Note: When restoring a recorded file, the current password will not be
erased.
Reset Setting
The Factory Reset button helps you to reset the device back to the default
setting from the factory. Be aware that the entire configuration will be reset;
the IP address of the device will be set to the default setting of 192.168.0.1.
Figure 30. Reset Setting
Logout
When you select this function, the Web configuration will log out and return to
first Login page.
33
To Next Page
Loading...
Need help?
General