DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
17
• DGS-1510-28P: When the internal temperature, detected by the sensor, rises above 42°C, the
fan will automatically change to the high speed. When the internal temperature, detected by the
sensor, falls below 39°C, the fan will automatically change to the low speed.
• DGS-1510-52: When the internal temperature, detected by the sensor, rises above 47°C, the fan
will automatically change to the high speed. When the internal temperature, detected by the
sensor, falls below 43°C, the fan will automatically change to the low speed.
To Next Page
Loading...
