D-Link DGS-1510 Series - Performance; LED Indicators

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
38
DGS-1510-28P: 243090.6950 Hours
DGS-1510-52: 433434.1606 Hours
EMI/EMC; Test Reports
CE Class A, FCC Class A, VCCI Report Class A, C-Tick Report Class
A, BSMI, CCC
Safety Certifications and
Test Reports
UL/CSA 60950-1, IEC 60950-1:2001, BSMI
Performance
Feature Detailed Description
Transmission Method
Store-and-forward.
Packet Buffer DGS-1510-20/28/28P: 1.5 Mbytes per device.
DGS-1510-52: 3 MBytes per device.
Wire Speed
Wire speed operation on all FE/GE/10GE ports.
Switching Capacity DGS-1510-20: 76 Gbps.
DGS-1510-28: 92 Gbps.
DGS-1510-28P: 92 Gbps.
DGS-1510-52: 140 Gbps.
64 Byte System Packet
Forwarding Rate
DGS-1510-20: 56.54 Mpps (Mega Packets Per Second)
DGS-1510-28: 68.45 Mpps (Mega Packets Per Second)
DGS-1510-28P: 68.45 Mpps (Mega Packets Per Second)
DGS-1510-52: 104.16 Mpps (Mega Packets Per Second)
Priority Queues
8 Priority Queues per port.
MAC Address Table
Supports 16K MAC addresses.
Supports 512 Static MAC addresses.
Virtual Stacking /
Clustering
Supports D-Link Single IP Management version 1.6.
Manage up to 32 devices in a virtual stack with a single IP address.
LED Indicators
Location LED Indicative Color Status Description
Per Device Power Green
Solid Light Power on.
Blinking Performing System Self-test.