DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
In the Main Settings section, you can specify the following parameters:
Parameter Description
Interface
From the drop-down list, select a physical or virtual interface to be
used for the authorization server. In order to specify an additional
interface, for example, a separate LAN port or a Wi-Fi network, it is
necessary to create another VLAN for this port or network (see the
VLAN section, page 209).
Lease time
The interval (in seconds) between sending authorization requests to
clients.
Logging level
Select a type of messages and alerts/notifications to be logged.
IP address
Specify an IP address of the router to be used for authorized client
access.
Mask Specify a subnet mask.
Ping
If the switch is moved to the right, the router responds to ping
requests by the IP address specified on this page. For security
reasons, it is recommended to disable this function.
Figure 187. The page for adding an authorization server. The RADIUS server section.
In the RADIUS server section, you can specify the following parameters:
Parameter Description
Primary RADIUS server
address / Secondary
RADIUS server address
Enter addresses of the primary and secondary RADIUS servers in the
relevant fields.
Page 240 of 303
To Next Page
Loading...
