DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Parameter Description
RADIUS encryption key
The password which the router uses for communication with the
RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
RADIUS server port A port of the RADIUS server.
Authentication port
The number of a router port which will be used to connect to the
RADIUS server. By default, the value 1812 is specified.
NASID
A network access server ID (the value of this parameter is specified
in the RADIUS server settings).
Figure 188. The page for adding an authorization server. The MAC authentication section.
In the MAC authentication
19
section, you can specify the following parameters:
Parameter Description
Enable
MAC authentication allows the RADIUS server to authorize clients
by their MAC addresses. Move the switch to the right to enable
MAC authentication.
Move the switch to the left to disable MAC authentication.
Password
If required, specify the password to authenticate clients by their
MAC addresses.
Suffix Specify a suffix for anonymous MAC authentication.
19 Will be available in future software versions.
Page 241 of 303
To Next Page
Loading...
