D-Link DNS-323

43D-Link DNS-323 User Manual
Section 3 - Configuration
DHCP Server
DHCP Server
Starting IP
Address
Ending IP
Address
Lease Time
DHCP Client
List
The DNS-323 can be used as a DHCP Server. As a DHCP server, it can be used to serve IP addresses to other
devices on your local network. However, this feature should not be enabled if you already have a DHCP server, such
as a router on your local network.
Click the Enable or Disable radio button to enable
or disable the DNS-323 DHCP server.
Enter the starting IP address for the range of
addresses assigned by the DHCP server.
Enter the ending IP address for the range of
addresses assigned by the DHCP server.
Sets the duration of time that an IP address will
remain assigned to a device.
Displays the Hostname, IP address, MAC address
and Expired Time of the clients that have received
a DHCP address from the DNS-323.