87D-Link DNS-323 User Manual
Section 3 - Configuration
NFS
Network File System (NFS) is a protocol for network share folders. Go to Advanced -> Add-ons to add and enable
the NFS application pack in order to see the window below. For installing the application pack, refer to page 45 for
more detail.
Go to Advanced -> Network Access to see NFS appear
under Type in the Network Access Settings section. Click
NFS and enter the information below.
Host
Folder
Permission
Root Squash
NFS List
Select the appropriate login method to
access the les for download. If the site
requires login credentials, select Account
and enter a valid username and password.
Click the Browse button to open and select
the folder or directory you are controlling
access to.
Set the user or group permission to Read
Only or to R/W: Read/Write.
Select Yes to map the root users when
accessing NFS.
Lists all dened access rules. To modify an
access rule, click the
icon. To remove an
access rule, click the
icon.
Note: To allow NFS access to anyone on the network, enter the IP Address 192.168.0.0/24 where 192.168.0.0 is the
IP Subnet of your network.
To Next Page
Loading...
