D-Link DNS-323

48D-Link DNS-323 User Manual
Section 3 - Configuration
System
Restart
Restore
Defaults
Shutdown
Configuration
Settings
Idle Time
Power LED
Control
HTTPS
The DNS-323 System menu provides options for system restarts, saving and loading conguration settings, and setting
idle times.
Click Restart to reboot the DNS-323.
Click Restore to reset the DNS-323 to its factory
default settings. This will erase all previous
conguration changes.
Click Shutdown to turn off the DNS-323.
Click Save to save the current DNS-323 conguration
settings to a le on the local computer. If at a later
time you need to reload this conguration after a
system reset, browse to the le and click Load.
Enter the time (in minutes) that the administrator
will be allowed to remain idle while accessing the
DNS-323 conguration settings or that users will be
allowed to remain idle while accessing the download
schedule settings.
Click Apply to save the settings.
Click Disable to turn off the LED on DNS-323.
Click Enable to turn on the LED. Click the Apply
button.
Select the check box to use secure HTTPS, allowing
you access to the web interface. Click the Apply
button.