D-Link DNS-323

37D-Link DNS-323 User Manual
Section 3 - Configuration
FTP Server
FTP Account
Settings
Category
User / Group
Folder
Permission
FTP Server
Settings
Max. User
Idle Time
The DNS-323 is equipped with a built-in FTP Server, which is easy to congure. It allows users access to important
data whether they are on the local network or at a remote location. The FTP server can be congured to allow user
access to specic directories, and will allow up to 10 users to access the DNS-323 at a time. For improved security,
the DNS-323 supports use of an FTPS client, such as SSL/TLS, to encrypt both the password and the data. The
DNS-323 supports FireFTP, a cross-platform FTP client for Mozilla Firefox users. See the Using FireFTP section on
page 89 for more information.
This section contains the user and group
conguration settings for access to the FTP folder
to the DNS-323.
Determines whether the FTP server rule will apply
to an individual user or a group.
Select the user or group for the FTP account or
you can select All Accounts under User.
Browse to open and select the folder or directory
you are granting FTP access to. Select root to
grant access to all volumes.
Set the user or group permission to Read Only
or RW: Read/Write.
This section contains the conguration settings
for the DNS-323 FTP Server.
Sets the maximum amount of users that can
connect to the FTP server.
Sets the amount of time a user can remain idle
before being disconnected.