D-Link DPR-2000 - Page 123

Setting up Printing in Mac OS X Tiger (10.4.9)
D-Link DPR-2000 - User Manual 118
chown bin.daemon /var/spool/hp5l
chmod 775 /var/spool/hp5l
5. Add an entry for the printer to /etc/printcap, similar to the following:
hp5l:\
:lp=:sd=/var/spool/hp5l :mx#0:\
ame you created above. If
backslash.
6.
rt command)
.
name,
es used above are:
be blank.
:rm=ps-142634:rp=ps-142634-p1:
The meaning of each of the entries is described below. The directory path in the
sd spool directory entry should match the directory n
your entry requires more than one line you can escape the newline with a
Issue the command
lpc start hp5l
to start a spool daemon for the printer. The printer will now be available for use.
7. Optionally, add another printcap entry (and issue another lpc sta
for a second printer, using the port_TEXT
port. This second printer name can be
used for printing text files
Entries in /ect/printcap begin with a name for the printer or a list of
separated by | (a vertical bar). The entri
◆ lp= The lp entry is used to specify a local printer device.
Since the printer is a remote printer, this entry should