D-Link DPR-2000 User Manual

Using the Web Configurator
5. Select an Access Right for tha
6. Click Apply Setting to save the setting
t Community Name.
s in the Print Server. To abort and exit
s Admin, and its Password is blank.
r Name and Password are used to access the user interface of the Print
The Password screen below allows you to change
th
without saving, click Cancel.
MAINTENANCE > Password
By default, the User Name of the Print Server i
The Use
Server to set its configurations.
is default password.
Do as follows to set the password:
1. In the Current Password field, type in the current password (which is also the
default password, if you have never changed it).
2. In the New Password field, type in a new password.
3. In the Confirm Password field, type in the new password again to confirm.
4. Server. To abort and Click Apply Settings to save the new password in the Print
exit without saving, click Cancel.
D-Link DPR-2000 - User Manual 65

D-Link DPR-2000 Specifications

General

Brand	D-Link
Model	DPR-2000
Category	Print Server
Language	English