D-Link DPR-2000 User Manual

Using the Web Configurator
SETUP > LAN SETUP
The LAN Setup screen allows you configure your Print Server’s local network
settings. Please note that this section is optional and you normally do not need to
change any of the settings here to get your Print Server up and running.
TCP/IP
This screen allows you to automatically or manually assign an IP address for your
Print Server. If you click Manually Assign, enter the information in these boxes: IP
Address, Subnet Mask, and Default Gateway.
If you have made changes to this screen, click Apply Settings to save them. To
abort and exit, click Cancel.
D-Link DPR-2000 - User Manual 45

D-Link DPR-2000 Specifications

General

Brand	D-Link
Model	DPR-2000
Category	Print Server
Language	English