Setting up Printing in Mac OS X Tiger (10.4.9)
D-Link DPR-2000 - User Manual 121
7. Answer r (remote printer) to the question
Is printer a remote printer or a local printer (r/l)?
8. When prompted with the question:
enter the name of the remote host that printer is attached
9.
Is this correct? (y/n)
1
Would you like this to be the system default printer? (y/n)
11
12.
n)?
On ting is set up, you can use the lp command to print jobs to the new
ation, consult your SCO Unix documentation.
Please
to:
then enter the address of the D-Link print server. You can use the name you
added to /etc/host in the step above.
Confirm that your entries are correct.
0. Answer the question:
. When you are done adding remote printers, enter q for the printer name.
Answer y to the question
Do you want to start remote daemon now (y/
ce remote prin
printer. For more inform