D-Link DPR-2000

Wireless Basics
same zone as most of the users who will be using it. If your network is not divided
into zones, the AppleTalk Zone field should contain a single asterisk (*).
For each Printer Port that will be used for AppleTalk printing, you may need to
change the AppleTalk Port Settings in the Advanced LAN screen, shown as below .
ppleTalk A
Enter the AppleTalk Zone name in the box or a “*” if it is not divided into zones.
Chooser Name
: This field displays the print server's port name.
Printer Type
: Enter the printer type in this field.
PostScript Level
: Select either Level 1 or Level 2 from the drop-down menu.
Font Group
: Select the Font Group from the drop-down menu.
D-Link DPR-2000 - User Manual 140