17D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Getting Started
This step of the wizard allows you to configure your Internet connection type.
Choose either DSL WAN or Ethernet WAN from the WAN Physical Type
drop-down menu.
Choose DSL WAN if you are connecting your router directly though an RJ-11 cable to
your phone jack.
Choose Ethernet WAN if you are connecting to an external modem or other Ethernet
WAN device.
Note: If you choose Ethernet WAN, make sure your WAN connection is plugged into Port
4.
Step 3: Setup Internet Connection
To Next Page
Loading...
