DSL-2740E User Manual
78
The following table describes the parameters of this page:
Field Description
ACS Configuration
URL The URL of the auto-configuration server to
connect to.
User Name The user name for logging in to the ACS.
Password The password for logging in to the ACS.
Periodic Inform Enable Select Enable to periodically connect to the
ACS to check configuration updates.
Periodic Inform
Interval
Specify the amount of time between
connections to ACS.
Connection Request
User Name The connection username provided by TR-069
service.
Password The connection password provided by TR-069
service.
Debug
Show Message Select Enable to display ACS SOAP messages
on the serial console.
CPE sends GetRPC Select Enable, the router contacts the ACS to
obtain configuration updates.
Skip MReboot Specify whether to send an MReboot event
code in the inform message.
Delay Specify whether to start the TR-069 program
after a short delay.
Auto-Execution Specify whether to automatically start the
TR-069 after the router is powered on.
CT Inform Extension Specify support China Telecom extension inform
type or not.
Certificate Management
CPE Certificate
Password
The certificate password of the router.
CPE Certificate Enter the CPE Certificate file. Click it to browse
and upload the certificate for the router.
CA Certificate Click it to browse and upload the CA certificate
To Next Page
Loading...
Need help?
Data Transfer Rates
