19
Select “PPTP” and enter the IP Address, Subnet mask, PPTP Server, PPTP ID and Password. Then click
the “Accept” button at the bottom.
BigPond (for Australia use only)
Click “BigPond Cable” Enter User Name and Password. Login Server is optional. Then click the “Accept”
button at the bottom.
(DNS) Settings
Domain Name Server (DNS): While a gateway is accessing another gateway or computer with a hostname,
it will look up the IP address from the DNS provided by ISP. The ISP whilst negotiating with PPPoE or
DHCP usually assigns the DNS information. In the case that the DNS is not assigned automatically or
WAN port is assigned with a static IP address, the DNS information must be assigned manually.
Auto : Gateway learns primary & secondary addresses from ISP’s DHCP server or PPPoE server.
Manual : Enter the primary & secondary addresses manually. Please be sure the IP addresses are
correct otherwise the gateway will not be able to access hosts with its hostname.
Clone MAC
To Next Page
Loading...
Need help?
General
