23
QoS Settings
WAN QoS
QoS (Quality of Service): Sets an external bandwidth to ensure sound quality during
transmission (When this function is enabled, the voice packet has the highest priority to
ensure telecommunication quality while less bandwidth is assigned for data transmission).
Some models of the gateway without this function can adjust the bandwidth automatically.
ToS/DiffServ (Type of Service/DSCP): The voice packet has the highest priority to ensure
telecommunication quality; the larger the value you set, the higher priority you will get.
LAN QoS※
Priority: Set the priority of physic LAN port.
Flow Control: Enable or Disable Flow control.
Incoming Rate Limit: Set the incoming rate limit of a specific LAN port.
Outgoing Rate Limit: Set the outgoing rate limit of a specific LAN port.
To Next Page
Loading...
Need help?
General
