7. Advanced Feature
Static Route※
Build static routes within an internal network. These routes will not apply to the Internet.
Route: Enter the IP of the specified network.
Route Mask: Enter the subnet mask to be used for the specified network.
Next Hop IP: Enter the IP address to the specified network.
Inter Face: Select the inter face.
RIP(Routing Information Protocol) ※
Establish dynamic routes within an internal network. These routes will not apply to the Internet.
Enable Authentication/Authentication Password: All the boxes in this RIP group should be
filled in the same password if ticked.
To Next Page
Loading...
Need help?
General
