DVG-7111S User’s Manual ADVANCED
D-Link Systems, Inc. 51
3-2-1-9 Hot Line
ADVANCED → VoIP → Hot Line
Hot Line: Check to direct the call automatically to a pre-configured destination without any action when
the FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no
other phone numbers can be dialed.
Hot Line No.: Enter the number for pre-defined destination.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number. The
call will be automatically directed to the pre-configured destination within timeout period.
Dial-out Prefix: Define the number dialed automatically by the system before the FXO interface diverts
a call to the PSTN.
FXO Line Default Dial-Out: Define the number dialed automatically by the system when it receive an
incoming call from VoIP.
ADVANCED → VoIP → Hot Line
To Next Page
