D-Link DWL-G700AP

15
UsingtheCongurationUtility(continued)
Home>DHCP
DHCPServer:SelectEnabledorDisabled.Disabledisthedefaultsetting.
IfyouwanttousetheDWLG700APasaDHCPserver,toautomaticallyassign
dynamicIPaddressesonthenetwork,youwillselectEnabled.
StartingIPAddress:IfyouhaveenabledtheDHCPserverfunction,enterthe
startingpointoftheIPaddressrangeforyournetwork.
EndingIPAddress:EntertheendingIPaddressofyourIPaddressrange,ifyou
haveenabledtheDHCPfunctionoftheDWLG700AP.
LeaseTime:ChoosethelengthoftimeduringwhichtheDHCPfunctionofthe
DWLG700APautomaticallyregeneratestheIPaddressestothedevicesinyour
network.
DHCPClientTable:Liststhedevicesonyournetworkthatarereceivingdynamic
IPaddressesfromtheDWLG700AP.