EasyManua.ls Logo

D-Link DWL-G700AP - Advanced Performance Settings

D-Link DWL-G700AP
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
UsingtheCongurationUtility(continued)
Advanced>Performance
BeaconInterval:Beaconsare
packetssent by an access point
tosynchronizeawirelessnetwork.
Specify a beacon interval value.
Default(100)isrecommended.
RTS Threshold: This value
should remain at its default
settingof2,432.Ifyouencounter
inconsistentdataow,onlyminor
modications to the value range
between 256 and 2,432 are
recommended.
Fragmentation: This value
shouldremainatitsdefaultsetting
of2,346.Ifyouexperienceahigh
packeterrorrate,youmayslightlyincreaseyourfragmentationthresholdwithinthe
valuerangeof256to2,346.Settingthefragmentationthresholdtoolowmayresultin
poorperformance.
DTIMInterval(BeaconRate):(DeliveryTrafcIndicationMessage)Enteravalue
between1and255(defaultis3)fortheDeliveryTrafcIndicationMessage(DTIM.)
ADTIMisacountdowninformingclientsofthenextwindowforlisteningtobroadcast
andmulticastmessages.
TXRates:Selectthetransmissionrateforthenetwork.
Authentication:
OpenSystemCommunicatesthekeyacrossthenetwork.
SharedKeyDevicesmusthaveidenticalWEPsettingstocommunicate.
WPAWPAauthenticationinconjunctionwithaRADIUSserver.
WPAPSKWPAauthenticationwithoutaRADIUSserverinthenetwork.
ModeSetting:Forutmostspeed,selectGModetoincludeonly802.11gdevices
in your network. Select Mix Mode to include 802.11g and 802.11b devices in your
network.
Preamble:LongPreambleisthedefaultsetting.(Hightrafcnetworksshoulduse
theshorterpreambletype.)ThepreambledenesthelengthoftheCRCblock(Cyclic
RedundancyCheckisacommontechniquefordetectingdatatransmissionerrors)used
incommunicationbetweentheaccesspointandthewirelessnetworkadapters.
SSIDBroadcast:(ServiceSetIdentier)EnableorDisable(default)thebroadcastof
theSSIDnameacrossthenetwork.SSIDisanamethatidentiesawirelessnetwork.
AlldevicesonanetworkmustusethesameSSIDtoestablishcommunication.
AntennaTransmitPower:Selectthetransmissionpoweroftheantenna.Limiting
antennapowercanbeusefulforsecuritypurposes.

Other manuals for D-Link DWL-G700AP

Related product manuals