D-Link DWL-G700AP - Resetting to Factory Defaults

39
Troubleshooting(continued)
4.ResettingtheDWLG700APtoFactoryDefaultSettings
Afteryouhavetriedothermethodsfortroubleshootingyournetwork,youmay
choosetoResettheDWLG700APtothefactorydefaultsettings.Rememberthat
DLinkAirPlusGproductsnetworktogether,outofthebox,atthefactorydefault
settings.
TohardresettheDLinkAirPlusGDWLG700APtoFactoryDefaultSettings,
pleasedothefollowing:
 LocatetheResetbuttononthebackoftheDWLG700AP
 UseapapercliptopresstheResetbutton
 Holdforabout5secondsandthenrelease
 AftertheDWLG700APreboots(thismaytakeafewminutes)itwillbe 
 resettothefactorydefaultsettings.