D-Link DWR-111 - Page 13

9D-Link DWR-111 User Manual
Section 3 - Conguration
Create a new password and then click Next to continue.
Click Prev to go back to the previous page or click Cancel to close the
wizard.
Select your time zone from the drop-down box and then click Next to
continue.
Click Prev to go back to the previous page or click Cancel to close the
wizard.
Select the Internet connection type. The connection types are explained
on the following page. If you are unsure of the correct connection type,
you may have to contact your Internet Service Provider (ISP).
Click Prev to go back to the previous page or click Cancel to close the
wizard.
Note: The DWR-111 supports several kinds of WAN interfaces, allowing you
to assign either a WAN or a WWAN(3G) connection as the Backup WAN. If
the Primary WAN is down or unavailable, congure the Backup WAN to
Enable, and all the trac will be routed through Backup WAN. This feature
is called WAN Failover. You can use WAN Failover if you need redundancy
to your Internet connection or any other network.