D-Link DWR-111 - Page 14

10D-Link DWR-111 User Manual
Section 3 - Conguration
Choose this if your Internet connection automatically provides you with an IP Address. Most cable modems use this
type of connection. See page 14 for information about how to congure this type of connection.
Choose this option if your Internet connection requires a username and password to connect. Most DSL modems use
this style of connection. See page 15 for information about how to congure this type of connection.
Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP). See page 17 for
information about how to congure this type of connection.
Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See page 19 for information
about how to congure this type of connection.
Choose this option if your Internet Setup Provider provided you with a user name and password to use with your
3G / 4G LTE enabled USB Dongle. See page 21 for information about how to congure this type of connection.
Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually
congured. See page 23 for information about how to congure this type of connection.
DHCP Connection
(Dynamic IP Address):
Username / Password
Connection (PPPoE):
Username / Password
Connection (PPTP):
Username / Password
Connection (L2TP):
3G Connection:
Static IP Address
Connection:
The subsequent conguration pages will dier depending on the selection you make on this page.