6D-Link DWR-730 User Manual
Section 2 - Installation
Connect to Your Network
Installation
This section will guide you through the installation process.
1. Ensure that your DWR-730 Mobile Wi-Fi Hotspot 21 Mbps is powered o.
2. Remove the back cover and take out the battery. Slide your (U)SIM card into the slot
provided, ensuring that the alignment is the same as indicated by the logo next to the
slot. The gold contacts on the card should be facing downwards.
Caution: Always unplug and turn o the router before installing or removing the SIM card.
Never insert or remove the SIM card while the router is in use.
3. Press and hold the power button on the side of the router.
a. “D-Link” will be displayed on the screen as the router performs its initialization processes.
b. After a few moments, the OLED display will show the current status of the router’s
various functions. For more details on the OLED display, please refer to “OLED Display”
on page 4.
Insert a microSD Card
1. Ensure that your DWR-730 Mobile Wi-Fi Hotspot 21 Mbps is powered o.
2. Open the cover of the microSD slot on the side of the router.
3. Insert the microSD card into the slot and push it in until it locks into place.
To Next Page
Loading...
