D-Link DWR-730 - Network; Wi-Fi

22D-Link DWR-730 User Manual
Section 3 - Conguration
Network
The Network pages allow you to check the current status of your Local Area Network (LAN), and make changes to LAN settings.
This section allows you to congure the IP settings for your wireless network.
Wi-Fi
IPv4
Enter the IPv4 address for your Wi-Fi network. If you change
this address, you will need to enter the new address in your
web browser’s address bar in order to access the web-based
conguration utility.
Enter the IPv4 subnet mask for your Wi-Fi network.
Click Apply to save the current conguration.
IPv6
Enter the IPv6 address for your Wi-Fi network.
Enter the prex to be used to delegate IPv6 addresses to the
LAN.
Check the box to set the router announcement mode to
autonomous.
Check the box to enable router announcement on-link
Click Apply to save the current conguration.
DNS Name
Enter your router’s DNS device name in the eld provided.
Click Apply to save the current conguration.
IP Address:
IP Subnet Mask:
IPv6 Address:
Prex for LAN:
RA Autonomous:
RA On-Link:
DNS Device Name: