D-Link DWR-730 - Ipv6 Filter

36D-Link DWR-730 User Manual
Section 3 - Conguration
IPv6 Filter
Click Add to add a new ltering rule.
Check the box to active the IP lter rule.
Enter the source IP address to be ltered.
Enter the port for the source IP.
Enter the destination IP address to be ltered.
Enter the port on the destination IP.
Select the protocol for the IP lter rule.
Click the icon to delete the IP ltering rule.
Click OK to save the current ltering rule. Click Apply to save
the current conguration.
Active:
Source IP:
Source Port:
Destination IP:
Destination Port:
Protocol:
Delete: