D-Link DXS-1210 Series Hardware Installation Guide

DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
24
Supported SFP/SFP+/SFP28 Transceivers
DEM-330R
1000BASE-BX-U
Single-mode
10 km
1310 nm
1550 nm
DEM-331T
1000BASE-BX-D
Single-mode
40 km
1550 nm
1310 nm
DEM-331R
1000BASE-BX-U
Single-mode
40 km
1310 nm
1550 nm
WDM (BiDi) SFP+ Transceivers
Product Code
Standard
Mode
Distance
TX
RX
DEM-436XT-BXD
10GBASE-LR
Single-mode
20 km
1330 nm
1270 nm
DEM-436XT-BXU
10GBASE-LR
Single-mode
20 km
1270 nm
1310 nm
SFP+ Direct Attached Cables (DAC)
Product Code
Standard
Cable
Dist.
Wire
Ω
Amps
DEM-CB100S
10G SFP+
Twinaxial
1 m
30 AWG
100 Ω
0.5 A
DEM-CB300S
10G SFP+
Twinaxial
3 m
30 AWG
100 Ω
0.5 A
DEM-CB700S
10G SFP+
Twinaxial
7 m
30 AWG
100 Ω
0.5 A
Certifications
EMC Certifications
CE Class A, FCC Class A, VCCI Report Class A, C-Tick Report Class A, BSMI
Safety Certifications
UL Mark (62368-1), CB Report (IEC60950-1), CB Report (IEC62368-1), LVD Report
(62368-1), BSMI

D-Link DXS-1210 Series Specifications

General

Product Series	DXS-1210
Power Supply	Internal
Jumbo Frame Support	9KB
Number of Ports	12
Layer	L2+
Form Factor	Rack-mountable
Uplink Ports	10G SFP+
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C