DXS-3326GSR Stackable Gigabit Layer 3 Switch
show fdb destination_hit ports
Entering this command without a specified <portlist> will allow the
user to view the destination hit port status of all ports on the Switch.
Restrictions None.
Example usage:
To view the destination hit port status:
DXS-3326GSR:4#show fdb destination_hit ports 1:1-1:10
Command: show fdb destination_hit ports 1:1-1:10
Port # Destination Hit State
-------- -----------------------------
1:1 Enabled
1:2 Enabled
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Disabled
1:7 Disabled
1:8 Disabled
1:9 Disabled
1:10 Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
101
To Next Page
Loading...
