D-Link DXS-3326GSR - Page 213

DXS-3326GSR Stackable Gigabit Layer 3 Switch
Command Parameters
show auth_client
show auth_diagnostics {ports [<portlist> | all]}
show auth_session
statistics
{ports [<portlist> | all]}
show auth_statistics {ports [<portlist> | all]}
Each command is listed, in detail, in the following sections.
enable 802.1x
Purpose Used to enable the 802.1x server on the Switch.
enable 802.1x
The enable 802.1x command enables the 802.1x Port-based or
MAC-based Network Access control server application on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Syntax
Description
Example usage:
To enable 802.1x switch wide:
DXS-3326GSR:4#enable 802.1x
Command: enable 802.1x
Success.
DXS-3326GSR:4#
disable 802.1x
Purpose Used to disable the 802.1x server on the Switch.
Syntax
disable 802.1x
The disable 802.1x command is used to disable the 802.1x
Port-based or MAC-based Network Access control server
application on the Switch.
Only administrator-level users can issue this command.
Description
Parameters None.
Restrictions
Example usage:
To disable 802.1x on the Switch:
205