D-Link DXS-3326GSR - Network Monitoring

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#disable 802.1x
Command: disable 802.1x
Success.
DXS-3326GSR:4#
create 802.1x user
Purpose Used to create a new 802.1x user.
Syntax
create 802.1x user <username 15>
Description
The create 802.1x user command is used to create new 802.1x
users.
Parameters
<username 15> − A username can be as many as 15
alphanumeric characters.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To create an 802.1x user:
DXS-3326GSR:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DXS-3326GSR:4#
show 802.1x user
Purpose Used to display the 802.1x user accounts on the Switch.
Syntax
show 802.1x user
Description
The show 802.1x user command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
206