D-Link DXS-3326GSR - Page 215

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
-------------- --------------
Darren Trinity
Total entries: 1
DXS-3326GSR:4#
delete 802.1x user
Used to delete an 802.1x user account on the Switch.
Syntax
delete 802.1x user <username 15>
Description
The delete 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
Parameters
<username 15> − A username can be as many as 15 alphanumeric
characters.
Restrictions Only administrator-level users can issue this command.
Purpose
Example Usage:
To delete 802.1x users:
DXS-3326GSR:4#delete 802.1x user
Command: delete 802.1x user dtremblett
Success.
DXS-3326GSR:4#
show 802.1x auth_configuration
Purpose Used to display the current configuration of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_configuration {ports [<portlist> | all]}
Description The show 802.1x command is used to display the current
configuration of the 802.1x Port-based Network Access Control
server application on the Switch.
207