D-Link DXS-3326GSR - Page 228

DXS-3326GSR Stackable Gigabit Layer 3 Switch
Example usage:
To display RADIUS settings on the Switch:
DXS-3326GSR:4#show radius
Command: show radius
Idx IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active des3226
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DXS-3326GSR:4#
show acct_client
Purpose Used to display the current RADIUS accounting client.
show acct_client
Description
The show acct_client command is used to display the current
RADIUS accounting client currently configured on the Switch.
Parameters None.
Restrictions
Syntax
None.
Example usage:
To view the current RADIUS accounting client:
DXS-3326GSR:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier D-Link
---------------------------------------------------------------------------------------
radiusAccServerIndex 1
radiusAccServerAddress 10.53.13.199
radiusAccClientServerPortNumber 0
radiusAccClientRoundTripTime 0
220