D-Link DXS-3326GSR - Page 249

DXS-3326GSR Stackable Gigabit Layer 3 Switch
config box_type
to the stack in future. A box_type may be assigned to this
box, in effect to pre-configure it, as it is added to the stack. If
box_type is not assigned, box is identified as
BOX_NOTEXIST and box type will be identified
automatically.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure box type:
DXS-3326GSR:4#config box_type current_box_id 3 type
BOX_NOTEXIST
Command: config box_type current_box_id 3 type BOX_NOTEXIST
Success.
DXS-3326GSR:4#
config all_boxes_id
Purpose Used to configure box IDs for switches in a stack.
Syntax
config all_boxes _id [static_mode | auto_mode]
Description This command will determine the mode of assigning box IDs.
Parameters static_mode – Box IDs assigned by the user
auto_mode – Box IDs are assigned automatically
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure box type:
DXS-3326GSR:4#config all_boxes_id auto_mode
Command: config all_boxes_id auto_mode
Success.
DXS-3326GSR:4#
show stack_information
Purpose Used to display the stack information table.
241