DXS-3326GSR Stackable Gigabit Layer 3 Switch
delete iproute
Backup. If the Primary Static/Default Route fails, the Backup Route
will support the entry. Please take note that the Primary and
Backup entries cannot have the same Gateway.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the
routing table:
DXS-3326GSR:4#delete iproute 10.48.74.121/8 10.1.1.254
Command: delete iproute 10.48.74.121/8 10.1.1.254
Success.
DXS-3326GSR:4#
delete iproute default
Purpose Used to delete a default IP route entry from the Switch’s IP routing
table.
Syntax
delete iproute default <ipaddr>
Description This command will delete an existing default entry from the
Switch’s IP routing table.
Parameters <ipaddr> - The gateway IP address for the next hop router.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the default IP route 10.53.13.254:
DXS-3326GSR:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DXS-3326GSR:4#
show iproute
Purpose Used to display the Switch’s current IP routing table.
Syntax
show iproute {<network_address>} {[static | rip | ospf]}
275
To Next Page
Loading...
