D-Link DXS-3326GSR - Page 290

DXS-3326GSR Stackable Gigabit Layer 3 Switch
config route redistribute dst rip src
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure route redistributions:
DXS-3326GSR:4#config route redistribute dst ospf src rip mettype
type_1 metric 2
Command: config route redistribute dst ospf src rip mettype
type_1 metric 2
Success.
DXS-3326GSR:4#
delete route redistribute
Purpose Used to delete an existing route redistribute configuration on the
Switch.
Syntax
delete route redistribute {dst [rip | ospf] src [rip | static | local
| ospf]}
Description This command will delete the route redistribution settings on this
switch.
Parameters
dst [rip | ospf]− Allows the selection of the protocol on the
destination device. The user may choose between RIP and OSPF.
src [rip | static | local | ospf] − Allows the selection of the protocol
on the source device. The user may choose between RIP, static,
local or OSPF.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete route redistribution settings:
DXS-3326GSR:4#delete route redistribute dst rip src ospf
Command: delete route redistribute dst rip src ospf
Success.
DXS-3326GSR:4#
show route redistribute
Purpose Used to display the route redistribution on the Switch.
282