D-Link DXS-3326GSR - Page 291

DXS-3326GSR Stackable Gigabit Layer 3 Switch
show route redistribute
Syntax
show route redistribute {dst [rip | ospf] | src [rip | static | local
| ospf]}
Description Displays the current route redistribution settings on the Switch.
Parameters
src [rip | static | local | ospf] − Allows the selection of the routing
protocol on the source device. The user may choose between RIP,
static, local or OSPF.
dst [rip | ospf] − Allows the selection of the routing protocol on the
destination device. The user may choose between RIP and OSPF.
Restrictions None.
Example Usage:
To display route redistributions:
DXS-3326GSR:4#show route redistribute
Command: show route redistribute
-------- ------------ -------- --------
STATIC RIP All 1
Source Destination Type Metric
Protocol Protocol
LOCAL OSPF Type-2 20
Total Entries : 2
DXS-3326GSR:4#
283