D-Link DXS-3326GSR - Page 294

DXS-3326GSR Stackable Gigabit Layer 3 Switch
enable bootp_relay
Used to enable the BOOTP relay function on the Switch.
enable bootp_relay
This command, in combination with the disable bootp_relay
command below, is used to enable and disable the BOOTP relay
function on the Switch.
Only administrator-level users can issue this command.
Purpose
Syntax
Description
Parameters None.
Restrictions
Example Usage:
To enable the BOOTP relay function:
DXS-3326GSR:4#enable bootp_relay
Command: enable bootp_relay
Success.
DXS-3326GSR:4#
disable bootp_relay
Purpose Used to disable the BOOTP relay function on the Switch.
Syntax
disable bootp_relay
Description
This command, in combination with the enable bootp_relay
command above, is used to enable and disable the BOOTP relay
function on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the BOOTP relay function:
DXS-3326GSR:4#disable bootp_relay
Command: disable bootp_relay
Success.
DXS-3326GSR:4#
286