DXS-3326GSR Stackable Gigabit Layer 3 Switch
show bootp_relay
Purpose Used to display the current BOOTP relay configuration.
Syntax
show bootp_relay {ipif <ipif_name 12>}
Description This command will display the current BOOTP relay configuration
for the Switch, or if an IP interface name is specified, the BOOTP
relay configuration for that IP interface.
Parameters
<ipif_name 12> − The name of the IP interface for which you what
to display the current BOOTP relay configuration.
Restrictions None.
Example Usage:
To display bootp relay status:
DXS-3326GSR:4#show bootp_relay
Command: show bootp_relay
Bootp Relay Status : Disabled
Bootp Hops Count Limit : 4
Bootp Relay Time Threshold : 0
Interface Server 1 Server 2 Server 3 Server 4
------------ --------------- --------------- --------------- --------------
System 10.48.74.122 10.23.12.34 10.12.34.12 10.48.75.121
Total Entries: 1
DXS-3326GSR:4#
287
To Next Page
Loading...
