D-Link DXS-3326GSR - Page 298

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#enable dnsr
Command: enable dnsr
Success.
DXS-3326GSR:4#
Example Usage:
To enable cache lookup for DNS relay.
DXS-3326GSR:4#enable dnsr cache
Command: enable dnsr cache
Success.
DXS-3326GSR:4#
Example Usage:
To enable static table lookup for DNS relay.
DXS-3326GSR:4#enable dnsr static
Command: enable dnsr static
Success.
DXS-3326GSR:4#
disable dnsr
Purpose Used to disable DNS relay on the Switch.
Syntax
disable dnsr {cache | static}
Description
This command is used, in combination with the enable dnsr
command above, to enable and disable DNS Relay on the Switch.
Parameters cache – This parameter will allow the user to disable the cache
lookup for the DNS rely on the Switch.
static - This parameter will allow the user to disable the static table
lookup for the DNS rely on the Switch.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable status of DNS relay.
290